An old painted breezeway panel above the new plywood copy CNC cut to match it, sunburst and scrolls lined up

The old panel (top) and the copy we cut from it (bottom).

What we cut

Screens and panels, cut to your pattern

  • Breezeway and fretwork panels, including copies of an old panel for a renovation
  • Decorative and privacy screen panels, cut from your own design or sketch
  • Batten-look screens with the slots cut, so the whole screen is one sheet
  • Gate inserts and feature panels cut to fit the frame
  • Plywood and marine ply to 25mm, MDF to 32mm, ACM to 4mm, aluminium to 16mm
  • Panels up to 2500 x 1500
  • Drawn up from a photo, a sketch or the old panel if you have no file

We cut the panels, ready for you or your builder to paint and fit. Painting, frames and installation are not part of what we do. Tell us if the screen is going outside so we can talk through the right material.

A recent job

A breezeway panel copied from the original

A builder needed a new breezeway panel to match the ones already in a house. There was no drawing of the pattern, so the old panel came in and we made the new one from it. This is how.

  • Flat scan of the old painted breezeway panel, with the sunburst rays and scrolls showing clearly

    1. Scan the old panel

    The old panel was scanned flat, so every ray and scroll could be traced at full size instead of guessed from a photo.

  • 3D CAD model of the redrawn breezeway panel with its sunburst and scroll cut-outs

    2. Redraw it in CAD

    Each shape was redrawn as clean lines and checked in 3D against the scan before anything was cut.

  • Breezeway panel cut from plywood, still on the CNC router bed with the sunburst rays cut through

    3. Cut it on the router

    The replica was cut from 9mm ply on our Multicam in one go, ready to sand, paint and fit.

On the machine

Cut in one pass, every shape the same

A router follows the drawing exactly, so a run of matching panels comes out identical, and a copy of an old panel lines up with the ones beside it.

Finishing the last cuts on the panel.
Close-up: cutting the rays through the ply.

Who we cut for

Renovators, builders and home owners

Renovating an older house: one breezeway or fretwork panel missing or rotted out? Bring in a good one and we copy it, so the new panel matches the rest.

Builders and carpenters: privacy screens, batten-look screens and feature panels cut to the sizes on your plans, as one-offs or a matching run.

Gates and fences: decorative inserts cut to fit your gate or fence frame. Send the frame's inside sizes and the pattern you want.

Your own design: got a pattern drawn up, or just a sketch? Send it through. No file? We draw it up in CAD and send it to you to check before anything is cut.

More on the sheets we cut on the plywood and MDF, ACM and aluminium pages. For a bigger feature piece, see the wave wall we built in 3D.

Recent Work

Off the Multicam

3D model of a square MDF peg board with a grid of 484 holes and a hand slot at each corner

18 November 2026

484-hole peg board in 18mm MDF

MR MDF 18mm Drawn from a sketch

A sketch turned into a 3D model and a dimensioned drawing: 484 holes on a 50 mm grid in an 1190 x 1190 sheet of 18mm moisture-resistant MDF, with four hand slots.

Read →
3D model of a wall sculpture made of 40 plywood ribs forming a rolling wave on a mounting board

16 November 2026

Wave wall sculpture: 40 plywood ribs

Marine ply 15mm 3D design check

A 1.8 m wave wall sculpture built in 3D from a set of drawings: 40 ribs in 15mm ply on a mounting board, plus one change we suggested to make it easier to assemble.

Read →
Batch of bolt template assemblies in 17mm form ply fitted with hold-down bolts, ready for delivery

30 May 2026

Bolt templates in form ply

Film face form ply 17mm Bolt template

Bolt templates cut from 17mm film face form ply for a local steel fabricator — they lock the hold-down bolt pattern in place during the concrete pour for steel columns on construction projects across Townsville and beyond.

Read →

See all recent work →

How it works

Three steps. No fuss.

  1. Send your DXF

    Email your DXF or DWG with material, thickness and quantity.

  2. Quote in 24 hours

    We come back with a quote covering material, cutting and any finishing.

  3. Parts in 3–5 days

    Standard turnaround. Same-day possible for simple high-volume runs.

The machine

Multicam SR2515vi

Australian-built flatbed CNC router. 2500 × 1500 mm bed handles a standard 2440 × 1220 sheet.

Bed
2500 × 1500 mm
Accuracy
±0.1 mm
Hold-down
Vacuum table
Tooling
HSD spindle, ATC

Service area

Townsville workshop. North Queensland & beyond.

We're a workshop in Townsville, by appointment. Collection welcome. Freight available to surrounding areas for larger orders — and we've shipped jobs as far as Brisbane.

  • Townsville
  • Burdekin
  • Charters Towers
  • Hinchinbrook

Questions

Quoting & pricing

Do I need a CAD file to get a quote?
No. A DXF or DWG is great if you've got one — but a photo, a sketch or just your measurements is enough. We'll draw it.
What does a drawing cost?
Simple parts from $29.95 + GST, bigger or multi-part jobs from $75 + GST. Whatever you pay comes off your cut price if you go ahead.
How much does the cutting cost?
Every job is quoted — it depends on the material, thickness, how much cutting and the quantity. Send what you've got and we'll quote within 24 hours.
What can you cut?
Plywood to 25mm, MDF to 32mm, aluminium to 16mm, ACM to 4mm, acrylic and plastics to 20mm, and form ply to 17mm — up to 2500 × 1500.
Who do you work with?
Our Townsville workshop is in Garbutt. Trade, business and DIY jobs all welcome.

Send a photo of the old panel or your design and we'll quote within 24 hours.