A batch of machined aluminium hawse winch fairleads, stacked and laid out on the bench

What we make

Aluminium parts for the 4WD, ute or car

  • Hawse-style winch fairleads machined from solid plate, both faces profiled
  • Axle spacers, profiled and drilled to your pattern
  • Brackets, mounting plates and firewall plates, holes and cut-outs in
  • Cover plates with machined fins or grooves
  • Switch panels with the switch holes cut and the labels engraved
  • Aluminium plate to 16mm, including 5083
  • One-off parts or a batch of the same part

We cut aluminium, not steel. We machine the part to your drawing, template or old part, and that is all we supply. Whether the part suits your vehicle, fitting it and any engineering sign-off are your responsibility, not ours.

A recent job

A batch of hawse winch fairleads from 16mm aluminium

Hawse-style winch fairleads, machined on our Multicam from 16mm aluminium plate. This is what went into them.

  • Machined from solid plate

    Each fairlead was machined out of 16mm aluminium plate in one piece, not bent up or welded.

  • Both faces profiled

    The rope slot, the countersunk bolt holes, the grooves across the face and the rounded edges were all cut on the router.

  • Held flat while they were cut

    The parts were screwed down through their own bolt holes, so they could not shift while the edges were finished.

  • A batch, all the same

    The whole batch came off the bed in one run, every one cut from the same drawing.

  • A finished aluminium hawse winch fairlead held in front of the CNC router bed with the rest of the batch

    Off the bed

    One fairlead out, the rest of the batch still on the machine.

  • Close-up of a machined aluminium fairlead showing the rope slot, countersunk bolt hole and grooved face

    The machined face

    Rope slot, countersunk bolt holes and the grooved face, straight off the cutter.

On the machine

Thick aluminium, cut with coolant

Machining the grooved faces, with coolant on.
Cutting the centre out of an axle spacer.

Other parts we have made

Spacers, plates and panels

  • Two aluminium axle spacers machined from thick plate, with bolt holes and a scalloped centre

    Axle spacers

    Cut from 16mm aluminium plate with the bolt holes and scalloped centre machined in.

  • Aluminium cover plate on the router bed with machined fins running along its face

    Finned cover plate

    Fins machined into the face of a cover plate, holes countersunk for the fixing screws.

  • Square cut-out with a stepped, machined edge in a sheet of aluminium firewall plate on the router bed

    Firewall plate

    Cut from 5mm aluminium, drawn up from a paper template.

  • Woodgrain switch panel with a square cut-out, three round switch holes and the words Left, Rear and Right engraved

    Switch panel

    Switch holes cut and the labels V-bit engraved, in one set-up.

Who we make parts for

4WD owners, workshops and car builders

4WD and ute owners: a fairlead, a bracket or a mounting plate that the shops don't sell in the size you need. Send a drawing or the measurements and we machine it.

Workshops and fitters: the same part again for every build. We keep the drawing, so a repeat batch comes out the same as the last.

Car builders and restorers: firewall plates, cover plates and panels copied from a paper or cardboard template, or from the old part.

No drawing? Send a sketch with measurements, a template or the old part. We draw it up in CAD and send it to you to check before anything is cut.

More on the plate we cut on the aluminium cutting page. Small plastic parts to go with the job can be 3D printed.

Recent Work

Off the Multicam

Assembled gemstone lapping machine — bronze base plate, vertical post with dial gauge, orange polishing bowl, angle gauge and speed-controlled drive motor

18 November 2025

Precision aluminium parts for a gemstone lapping machine

Aluminium 5083 (marine grade) 16mm Precision aluminium parts

High-tolerance precision parts for a gemstone lapping machine — drilling, milling and profile cutting in 16mm 5083 marine-grade aluminium, run on our Multicam with the Unist Coolubricator.

Read →

See all recent work →

How it works

Three steps. No fuss.

  1. Send your DXF

    Email your DXF or DWG with material, thickness and quantity.

  2. Quote in 24 hours

    We come back with a quote covering material, cutting and any finishing.

  3. Parts in 3–5 days

    Standard turnaround. Same-day possible for simple high-volume runs.

The machine

Multicam SR2515vi

Australian-built flatbed CNC router. 2500 × 1500 mm bed handles a standard 2440 × 1220 sheet.

Bed
2500 × 1500 mm
Accuracy
±0.1 mm
Hold-down
Vacuum table
Tooling
HSD spindle, ATC

Service area

Townsville workshop. North Queensland & beyond.

We're a workshop in Townsville, by appointment. Collection welcome. Freight available to surrounding areas for larger orders — and we've shipped jobs as far as Brisbane.

  • Townsville
  • Burdekin
  • Charters Towers
  • Hinchinbrook

Questions

Quoting & pricing

Do I need a CAD file to get a quote?
No. A DXF or DWG is great if you've got one — but a photo, a sketch or just your measurements is enough. We'll draw it.
What does a drawing cost?
Simple parts from $29.95 + GST, bigger or multi-part jobs from $75 + GST. Whatever you pay comes off your cut price if you go ahead.
How much does the cutting cost?
Every job is quoted — it depends on the material, thickness, how much cutting and the quantity. Send what you've got and we'll quote within 24 hours.
What can you cut?
Plywood to 25mm, MDF to 32mm, aluminium to 16mm, ACM to 4mm, acrylic and plastics to 20mm, and form ply to 17mm — up to 2500 × 1500.
Who do you work with?
Our Townsville workshop is in Garbutt. Trade, business and DIY jobs all welcome.

Send a drawing, a template or the old part and we'll quote within 24 hours.