18 November 2026
484-hole peg board in 18mm MDF
A sketch turned into a 3D model and a dimensioned drawing: 484 holes on a 50 mm grid in an 1190 x 1190 sheet of 18mm moisture-resistant MDF, with four hand slots.
Read →No drawing? No problem
No DXF? Send a sketch, a photo, your measurements or the old part and we draw it up in CAD, check it in 3D where it helps, then cut it. Quote within 24 hours.
No drawing? No problem
A boat owner brought in a rotted floor panel. We measured it up on the bench.
Drawn in CAD with all the cut-outs and clearances.
Cut from 18mm marine ply on the Multicam. It dropped straight into place, first try.
What we draw
The drawing is done so we can cut the job for you. Already have a DXF or DWG? Send it and there is nothing to draw.
Recent Work
18 November 2026
A sketch turned into a 3D model and a dimensioned drawing: 484 holes on a 50 mm grid in an 1190 x 1190 sheet of 18mm moisture-resistant MDF, with four hand slots.
Read →
16 November 2026
A 1.8 m wave wall sculpture built in 3D from a set of drawings: 40 ribs in 15mm ply on a mounting board, plus one change we suggested to make it easier to assemble.
Read →
1 December 2025
Eight-bolt octagonal templates — 20 cut in one batch from 9mm MDF for a major Townsville precast concrete manufacturer. Used to lock the splice flange bolt pattern during spliced pile fabrication.
Read →How it works
Email your DXF or DWG with material, thickness and quantity.
We come back with a quote covering material, cutting and any finishing.
Standard turnaround. Same-day possible for simple high-volume runs.
The machine
Australian-built flatbed CNC router. 2500 × 1500 mm bed handles a standard 2440 × 1220 sheet.
Service area
We're a workshop in Townsville, by appointment. Collection welcome. Freight available to surrounding areas for larger orders — and we've shipped jobs as far as Brisbane.
Questions