No drawing? No problem

From the old part to a new one

  1. A rotted boat floor panel on the bench being measured with a steel rule

    Bring us the old part

    A boat owner brought in a rotted floor panel. We measured it up on the bench.

  2. CAD drawing of the replacement panel with every dimension marked

    We draw it up

    Drawn in CAD with all the cut-outs and clearances.

  3. The new 18mm marine ply panel cut out on the Multicam router

    We cut the new one

    Cut from 18mm marine ply on the Multicam. It dropped straight into place, first try.

See the full job →

What we cut

Panels cut to match your boat

  • Floor panels cut to match the old one, cut-outs included
  • Marine ply to 25mm
  • 5083 marine aluminium plate to 16mm
  • Hatches, seat bases, casting decks and trailer boards
  • Panels up to 2500 x 1500

We cut the panel, ready for you or your boat builder to seal and fit. Bring the old panel if you still have it; if not, a sketch with measurements or a cardboard template works.

Recent Work

Off the Multicam

3D model of a wall sculpture made of 40 plywood ribs forming a rolling wave on a mounting board

16 November 2026

Wave wall sculpture: 40 plywood ribs

Marine ply 15mm 3D design check

A 1.8 m wave wall sculpture built in 3D from a set of drawings: 40 ribs in 15mm ply on a mounting board, plus one change we suggested to make it easier to assemble.

Read →
Assembled gemstone lapping machine — bronze base plate, vertical post with dial gauge, orange polishing bowl, angle gauge and speed-controlled drive motor

18 November 2025

Precision aluminium parts for a gemstone lapping machine

Aluminium 5083 (marine grade) 16mm Precision aluminium parts

High-tolerance precision parts for a gemstone lapping machine — drilling, milling and profile cutting in 16mm 5083 marine-grade aluminium, run on our Multicam with the Unist Coolubricator.

Read →
An 18mm marine ply boat floor panel being cut on the Multicam

16 October 2025

Marine ply boat floor replacement

Marine ply 18mm Pattern from original

A boat floor panel rebuilt in 18mm marine ply — we measured the rotten original, drew it up in Fusion, and cut a perfect drop-in replacement on the Multicam.

Read →

See all recent work →

How it works

Three steps. No fuss.

  1. Send your DXF

    Email your DXF or DWG with material, thickness and quantity.

  2. Quote in 24 hours

    We come back with a quote covering material, cutting and any finishing.

  3. Parts in 3–5 days

    Standard turnaround. Same-day possible for simple high-volume runs.

The machine

Multicam SR2515vi

Australian-built flatbed CNC router. 2500 × 1500 mm bed handles a standard 2440 × 1220 sheet.

Bed
2500 × 1500 mm
Accuracy
±0.1 mm
Hold-down
Vacuum table
Tooling
HSD spindle, ATC

Service area

Townsville workshop. North Queensland & beyond.

We're a workshop in Townsville, by appointment. Collection welcome. Freight available to surrounding areas for larger orders — and we've shipped jobs as far as Brisbane.

  • Townsville
  • Burdekin
  • Charters Towers
  • Hinchinbrook

Questions

Quoting & pricing

Do I need a CAD file to get a quote?
No. A DXF or DWG is great if you've got one — but a photo, a sketch or just your measurements is enough. We'll draw it.
What does a drawing cost?
Simple parts from $29.95 + GST, bigger or multi-part jobs from $75 + GST. Whatever you pay comes off your cut price if you go ahead.
How much does the cutting cost?
Every job is quoted — it depends on the material, thickness, how much cutting and the quantity. Send what you've got and we'll quote within 24 hours.
What can you cut?
Plywood to 25mm, MDF to 32mm, aluminium to 16mm, ACM to 4mm, acrylic and plastics to 20mm, and form ply to 17mm — up to 2500 × 1500.
Who do you work with?
Our Townsville workshop is in Garbutt. Trade, business and DIY jobs all welcome.

Send a photo of the old panel and we'll quote within 24 hours.