What we cut

Aluminium, cut to your spec

  • Sheet and plate up to 16mm thick
  • 5083 marine plate
  • Profiles, holes, countersinks and slots

Recent Work

Off the Multicam

Assembled gemstone lapping machine — bronze base plate, vertical post with dial gauge, orange polishing bowl, angle gauge and speed-controlled drive motor

18 November 2025

Precision aluminium parts for a gemstone lapping machine

Aluminium 5083 (marine grade) 16mm Precision aluminium parts

High-tolerance precision parts for a gemstone lapping machine — drilling, milling and profile cutting in 16mm 5083 marine-grade aluminium, run on our Multicam with the Unist Coolubricator.

Read →

See all recent work →

How we work

Got a DXF?

We're a flatbed sheet cutting shop. Send the file — we cut it.

No file?

Send a photo, a sketch or just your measurements and we'll draw it for you. Simple parts — a shelf, a panel, a benchtop — from $29.95 + GST. Bigger or multi-part jobs from $75 + GST. Whatever you pay for the drawing comes off your cut price when you go ahead — so if you order, the drawing's basically free. DIY and hobbyist jobs welcome.

Other common formats welcome — DWG, STEP, IGES, Fusion, PDF or a rough sketch. Send what you've got and we'll work it out.

What we do

Operations

Production cutting and machining, straight from your file.

  • Profile cutting — any 2D shape from your DXF — outside profiles, internal cut-outs and holes in one pass.
  • Drilling & bolt holes — accurate, repeatable hole patterns and bolt-hole templates across a full run.
  • Countersinks & counterbores — recessed holes so bolt and screw heads sit flush.
  • Slots & pockets — milled to a set depth, not just cut all the way through.
  • Rebates & grooves — channels and step-downs for seating or joining panels.
  • Part marking — part numbers, ID codes and reference marks cut into the surface.
  • Chamfers & edge breaks — functional edge easing where a part needs it.
  • Nesting — parts laid out efficiently across the sheet to keep your material cost down.
  • Oversize / tiling — parts longer than the 2500 mm bed cut in indexed sections.

How it works

Three steps. No fuss.

  1. Send your DXF

    Email your DXF or DWG with material, thickness and quantity.

  2. Quote in 24 hours

    We come back with a quote covering material, cutting and any finishing.

  3. Parts in 3–5 days

    Standard turnaround. Same-day possible for simple high-volume runs.

The machine

Multicam SR2515vi

Australian-built flatbed CNC router. 2500 × 1500 mm bed handles a standard 2440 × 1220 sheet.

Bed
2500 × 1500 mm
Accuracy
±0.1 mm
Hold-down
Vacuum table
Tooling
HSD spindle, ATC

Service area

Townsville workshop. North Queensland & beyond.

We're a workshop in Townsville, by appointment. Collection welcome. Freight available to surrounding areas for larger orders — and we've shipped jobs as far as Brisbane.

  • Townsville
  • Burdekin
  • Charters Towers
  • Hinchinbrook

Questions

Quoting & pricing

Do I need a CAD file to get a quote?
No. A DXF or DWG is great if you've got one — but a photo, a sketch or just your measurements is enough. We'll draw it.
What does a drawing cost?
Simple parts from $29.95 + GST, bigger or multi-part jobs from $75 + GST. Whatever you pay comes off your cut price if you go ahead.
How much does the cutting cost?
Every job is quoted — it depends on the material, thickness, how much cutting and the quantity. Send what you've got and we'll quote within 24 hours.
What can you cut?
Plywood to 25mm, MDF to 32mm, aluminium to 16mm, ACM to 4mm, acrylic and plastics to 20mm, and form ply to 17mm — up to 2500 × 1500.
Who do you work with?
Our Townsville workshop is in Garbutt. Trade, business and DIY jobs all welcome.

Send a DXF — we'll quote within 24 hours.